Re: P2V: errors converting Windows 2000!
Yes, you can use external HDD to store the result files i.e. VMFrom the error I see, I suppose to do the conversion separately from the reconfig, once you have VM you can reconfig it as single (and...
View ArticleHyper-V 2012 R2 support
Hi, I'm wondering if anyone knows when/if Converter Standalone will support migrating VM's directly from Hyper-V 2012 R2/SCVMM ?We are looking to migrate over 350 VM's, so it's a shame this support has...
View ArticleRe: Hyper-V 2012 R2 support
I know - unfortunately this has not been planned yet, so do not expect it any time soon :-(.You can migrate those VMs by treating them as physical sources. Regards,Ivan
View ArticleRe: Hyper-V 2012 R2 support
with the Release of vSphere 6 they probabelly will have to launch a Update for the Converter.With the new converter they will surely also support Hyper-V 2012 R2.
View ArticleSysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT'...
Hi All, I see a error when doing P2V using converter 5.5.0 (An error occurred while opening a virtual disk. Verify that the converter server and the running source machines have a network access to the...
View ArticleRe: Sysimgbase_DiskLib_OpenWithPassPhrase failed with...
Please, check if source machine can resolve the target DNS name and port 902 is open. Take a look at this KB article for additional troubleshooting steps: VMware KB: Troubleshooting checklist for...
View ArticleRe: Sysimgbase_DiskLib_OpenWithPassPhrase failed with...
Your error is:2015-03-24T13:56:51.145+01:00 [02496 warning 'Default'] [,0] [NFC ERROR] NfcNewAuthdConnectionEx: Failed to connect to peer. Error: Host address lookup for server seuh2p581.it.mgt failed:...
View ArticleRe: Sysimgbase_DiskLib_OpenWithPassPhrase failed with...
I did added target ESX IP as well as the ESX Host server name with FQDN in the source hosts file...but the error still persists. The communication path is as follows: The servers need's to be migrated...
View ArticleRe: Sysimgbase_DiskLib_OpenWithPassPhrase failed with...
You should ensure connection between machine to be converted (a.k.a. source machine) to destination ESX at port 902.HTH
View ArticleFAILED: Unable to create a VSS snapshot of the source volume(s). Error code:...
Hi Everybody! I am totally new to virtualization and I'm going to add a new virtual server to our current domain. The end goal is to replace our current outdated Windows Server 2003 box. Before I...
View ArticleRe: FAILED: Unable to create a VSS snapshot of the source volume(s). Error...
I've google your error and found few interesting solutions like this one Error 0x80042306: The shadow copy provider had an error. And unfortunately there is no cold clone available.HTH
View ArticleRe: Error during conversion: [02516 error 'Default'] [task,350] [LRO]...
Hi,that is not the answer I was looking for, but it is like it is.Thanks for your support
View ArticleRe: Error : Permission to perform this operation was denied -- Log : Must be...
FYI.. Chris W. We have a domain policy which disables the default local 'Administrator' account. With that account 'disabled' I could not get converter to work.I even tried to make a new 'root'...
View ArticleProblems Migrating Windows 2012 from Xen Server to ESXi
Hi, I have been searching for info on my problem and can't seem to find anything. I have a XenServer Pool, Version 6.5. I am using the VMWare Standalone Converter to attempt to migrate VMs over to...
View ArticleRe: Problems Migrating Windows 2012 from Xen Server to ESXi
What are the SCSI Adapter and Network Adapter type in VMware? LSI and e1000 are natively supported by Windows
View ArticleRe: Problems Migrating Windows 2012 from Xen Server to ESXi
Thanks for the reply. I using the E1000 for network and treid both LSI Logic SAS and LSI Logic Patallel for SCSI. My gut is telling me the Xen Tools and Drivers are the heart of the issue. Thanks, K
View ArticleRe: Error during conversion: [02516 error 'Default'] [task,350] [LRO]...
Hi the unsupported OS also doesn't explain this quite unusual error in the log. Can you upload the worker log, too? It seems in this case Converter didn't include it in the bundle and you should get it...
View ArticleRe: Problems Migrating Windows 2012 from Xen Server to ESXi
Hello the default controllers for Windows 2012 are E1000e and LSI Logic SAS, but the older e1000 and LSI parallel should also work fine (they are supported by ESX and AFAIK by Windows too)I suppose...
View ArticleFile extension .QCOW2 on Windows
While I was researching for solution, I saw the file extension could have something to do with vmware, thats why I am asking my question here. I would like to know how, what software should I use, to...
View ArticleRe: File extension .QCOW2 on Windows
Hello and welcome to the communities. Note: Discussion successfully moved from Forums to VMware Converter StandaloneVMware Converter StandaloneVMware Converter Standalone I moved this to the VMware...
View Article