Re: An error occurred while opening a virtual disk. Verify that the converter...
Thank you Erik.Now it works. I had to configure dns fine to resolve ESX name.
View ArticleP2V using helper. Is this the right configuration?
My setup is following.P2V helper VM - network adapter 1: same subnet as the vCenter ; vCenter is accessible; individual host are pingable; name resolves; hosts files updated; i can putty too....
View ArticleRe: FAILED: An Error occurred during the conversion: 'Platform-specific error...
Hi Plamen, Finally the problem solved after changed the IP for VMkernel, i am not sure what wrong with that IP , suspect something block it from connect to Conveter, now i am able to telnet VMkernal...
View ArticleRe: Error during conversion: [02516 error 'Default'] [task,350] [LRO]...
Hi According to the log file you canceled the conversion reason = "Operation was canceled"Ein allgemeiner Systemfehler ist aufgetreten: Operation was canceled
View ArticleRe: P2V using helper. Is this the right configuration?
Hello Since you mention helper VM, I assume the question is about Linux P2V. If that's true, then the error message is misleading. It is being thrown at a quite general place, so this is...
View ArticleRe: Error during conversion: [02516 error 'Default'] [task,350] [LRO]...
Hello there is nothing meaningful in the GUI log. Pls attach the backend logs (server, worker, eventually agent); best - attach the task log bundle. Regards
View ArticleRe: Physical machine conversion to virtual machine
Hi Vinay10, You can also try a Cold Clone Look at this page Using the Cold Clone 3.0.3 ISO with vSphere 5 | That... Could Be A Problem... and in the middle of the page is the link the Cold Clone ISO....
View ArticleRe: Error during conversion: [02516 error 'Default'] [task,350] [LRO]...
Okay,enclosed the zip-file.Thanks and regards
View ArticleRe: P2V using helper. Is this the right configuration?
Sorry, by helper I meant a separate VM that I created for running the converter. Its a Windows Machine and the source is also a windows machine. Logs are attached. Thanks.
View ArticleTrouble with p2v conversion
Hi all!I get an error when p2v from windows 2008r2 to esxi 5.5Error: "Unable to proceed since the sysprep parameters provider are not correct"Checked on multiple machineHow to fix?
View ArticleRe: Trouble with p2v conversion
IMO the fail is because of user's temp folder with cyrillic...You can try to do conversion and customization as user 'Administrator'Or you can remove customization step...HTH
View ArticleRe: Remote P2V using intermediate machine . Is this the right configuration?
The VM's disks are accessed in ESX directly. You should allow access to ESX at port 902 from the source machine.Regards
View ArticleRe: Error during conversion: [02516 error 'Default'] [task,350] [LRO]...
Unfortunately your OS is not supported: "Windows XP Home Edition Service Pack 3 (Build 2600)"
View ArticleClik here to view.
Re: Remote P2V using intermediate machine . Is this the right configuration?
So, any ideas on how to achieve this p2v ? Its for 5 big servers - 1tb each.Current scenario:source is vlan1, esx hosts are vlan2VM running standalone convertor- has access to both vlan 1 and vlan2 ,...
View ArticleRe: Remote P2V using intermediate machine . Is this the right configuration?
This is possible solution. However you can do some tests to see the speed of the process. Also you should check which version of WS is compatible with ESX format - if this is possible, the second...
View ArticleP2V: errors converting Windows 2000!
Hi, I'm trying to convert a Physical Windows 2000 (SP4 installed) to a Virutal Machine. All the process is correct until at 95% of conversion it displays some errors. I attach the logs for more...
View ArticleRe: P2V: errors converting Windows 2000!
The errors are:[2015-03-21 20:00:16.781 02392 verbose 'App'] [,0] DISKLIB-DSCPTR: writing: Couldn't open descriptor file for \\Marcel-pc\f\test\SERVIDOR\SERVIDOR.vmdk...[2015-03-21 20:00:56.890 02392...
View ArticleRe: P2V: errors converting Windows 2000!
Hi, thanks for answering and analyzing the log. My first attempt was trying what you are describing: I installed the converter on source machine and connect to a Shared folder on my destination...
View ArticleRe: P2V: errors converting Windows 2000!
Correct, the destination folder should be SMB share, ensure that administrator also see the share, it's better to run GUI as administrator too.Also you can use the external USB as destinations.The...
View ArticleRe: P2V: errors converting Windows 2000!
Ok, one last question, when you say: "Also you can use the external USB as destinations." You mean I can connect an external HDD directly into the Source computer, and send the files there? And then,...
View Article