Re: trying to convert win2000 with v3.0.3
I see error:[#2] [2013-06-18 20:28:05.226 'App' 4436 error] [imageProcessingTaskImpl,536] BlockLevelVolumeCloning::task{9}: Image processing task has failed with PlatformError fault: 1117which is "The...
View ArticleConverter 5.1 - error 2338
Hi, I have several VM's on 2 locations, one datacenter that is managed by us on our site and several VM's hosted on external hosting company datacenter.Our own platform runs for now version 4.3 and the...
View ArticleRe: Converter 5.1 - error 2338
For Windows P2V conversions the source machine needs to have direct access to the destination ESX server on port 902. The actual error should be in the Converter Agent log on the source machine, but I...
View ArticleTrouble after convert Windows 7 64 bit into VMware
after convert Windows 7 64 bit into VMware, I get a bluescreen. I try to install vmscsi onto the source Computer before convert. It is not possible. Do you have an vmscsi for 64 bit? Kind RegardsE.Prietl
View ArticleClik here to view.
P2V Dynamic Disks
Dear all, We have an organisation who desperately want to convert a Server into VMware, however the disks are dynamic, please see image. Can anyone suggest the best route to achieve this? Many thanks
View ArticleRe: Converter standalone 5.1 crashes host on retrieving source machine...
Anyone? Are these the logs you are looking for?
View ArticleRe: Converter standalone 5.1 crashes host on retrieving source machine...
Please upload converter-worker and converter-agent logs.
View ArticleRe: Converter standalone 5.1 crashes host on retrieving source machine...
here are the logs you requested.
View ArticleRe: Trouble after convert Windows 7 64 bit into VMware
Did you select the "LSI Logic SAS" virtual disk controller in the VMware Converter's wizard? If you didn't, the VM was most likely created with an IDO controller which usually causes the issue you see....
View Article"Unable to obtain hardware information for the selected machine." Error ov...
So here I am again. Running a V2V conversion on a Windows 2K8 box. I get the "Unable to obtain hardware information for the selected machine." error when I try the conversion. So I try running the...
View ArticleRe: Converter standalone 5.1 crashes host on retrieving source machine...
Can you switch Worker logging level to verbose (instructions how to do it can be found at http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=2008019) and...
View ArticleRe: "Unable to obtain hardware information for the selected machine." Error...
Stil the same error:2013-06-19T11:35:58.995-04:00 [01364 info 'Default'] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'The specified virtual disk needs repair' (error code:14)Because this could be...
View ArticleRe: Converter fails on Server 2008 R2 P2P
OK, i found a fix for this. What worked for me was to install the Windows Server backup feature in server manager and perform a quick backup. I backed up my entire C: drive to a network share but I...
View ArticleRe: "Unable to obtain hardware information for the selected machine." Error...
OK, downgraded to 4.3 and then 4.0.1. Both failed but later on in the process, after hitting finish. Still the -R option says that there is nothing wrong with the VM. Any other ideas? Attached are...
View ArticleRe: P2V with Converter 5.1 fails
Can you disable the UAC on the Windows 7 machine. [05984 error 'Default'] UAC is enabled! the P2V conversion will probably fail with non elevated administrator 'alemoine'
View ArticleP2V with Converter 5.1 fails
Hello, I'm trying to convert a physical machine which runs RedHat EL 5.1 with Converter Standalone 5.1 installed on Windows 7.The process start by taking the fingerprint of the source system and this...
View Article