Clik here to view.
Re: converter error "Host key can't be retrieved.
Hi, I get the same problem as you had FAILED: A general system error occurred:Network error. Host IP key can't be retrieved. (return code 2) If the destination is an ESX host - connect to the server...
View ArticleRe: BSOD on start up
André,I have attempted to boot the machine in safe mode now as well but still the same result unfortunately.Another BSOD "7B".
View ArticleRe: Linux conversion failed with error : attempt to contact Helper service...
Hi Plamen, I finally succeeded ! Can't undestand exactly why but I had to :- install the converter in the same LAN than the source (linux VM), - open port 443 from converter to vcenter on my firewall-...
View ArticleTroubles when trying to P2V Win 2003 SBS
Hi, I'm trying to P2V a Windows Server 2003 SBS.However i'm having some issues. When i tried to convert the machine, it cloned the hard drives without any problems but when i started to reconfigure the...
View ArticleConverting Windows Vista RAID source
The source machine is Windows Vista Ultimate x32 that is running RAID 0 for the C: drive using the Nvidia hardware controller. I'm using Converter 5.1. The error I get at the end of conversion is:...
View ArticleUnable to find the system volume, reconfiguration is not possible.
Converting Windows 7, is returning this error. Any guidance.
View ArticleRe: Unable to find the system volume, reconfiguration is not possible.
This is GUI log, not very useful. Pls attach the worker log.
View ArticleRe: Converting Windows Vista RAID source
Hello, the vmx file shows the VM uses LSILogic controller which is fine, it doesn't give other useful info. pls attach the worker log, it is more useful.Sometimes the source machine having several...
View ArticleRe: Unable to find the system volume, reconfiguration is not possible.
Having problem generating all logs as well. I don't see any other logs than Gui logs.
View ArticleRe: Converting Windows Vista RAID source
Hopefully I attached the correct log file. Please let me know if that is not the case.
View ArticleRe: Troubles when trying to P2V Win 2003 SBS
The error in the log is:2013-08-02T15:47:35.774+02:00 [03572 error 'task-9'] Unable to find symmpi.sys in the specified CAB files2013-08-02T15:47:35.774+02:00 [03572 error 'task-9'] Reconfiguration...
View ArticleRe: Unable to find the system volume, reconfiguration is not possible.
On XP, 2003 they can be found in%ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone\logs On Vista, 7, 2008:%ALLUSERSPROFILE%\VMware\VMware vCenter Converter Standalone\logs
View ArticleRe: Converting Windows Vista RAID source
Vista uses BCD, not boot.ini, but converter can't find it:2013-08-02T01:20:24.393-06:00 [05892 info 'Default'] [LoadTempHive] Registry hive C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\vixmntapi159\BCD is...
View ArticleRe: V2V fails General System Error
It is the worker's log that's needed, server's is not quite informative.What do you mean "downloaded on to my local machine from another esx host"? ESX VMs don't run directly under Workstation, the...
View ArticleRe: P2V Ubuntu 10.04
In my situation, it's not a network drop or IP block.I'm using Standalone Converter 5.1I'm converting Ubuntu 10.04On the Converter console, the Ubuntu 10.04 would hang at 1% and fail.Hangs at message:...
View ArticleRe: V2V fails General System Error
In workstation 9 there is an option to connect to an ESxhost and download the vm to the local client and then run that client fromworkstation – I did this and the client runs I then closed...
View ArticleV2V fails General System Error
General System Error – internal error occurred tried various things but no luck, have attached log, i have access to thevspehre centre form my machine, I have the file on my local machine and...
View ArticleRe: V2V fails General System Error
OK, so re-ran this process but used the standalone converterconnected to the source esx server and the destination vcentre host It failed again However – changed the destination esx jpst server in...
View Article"Unable to Obtain Hardware information for the selected machine"
Summary:I am trying to migrate two VMware virtual machines from Linux VMware server 2.01 to a VMware infrastructure install running VMWare ESXi 5.1.0. When I try and use the Standalone converter to...
View ArticleRe: "Unable to Obtain Hardware information for the selected machine"
Try with VMware Converter 3.0.2u1 . Also check if all the necessary ports are opened
View Article