Re: P2V conversion fails with No connection could be made because the target...
Ensure that no old agent is present on source machine.HTH
View ArticleRe: P2V conversion fails with No connection could be made because the target...
There is no old agent on the source machine.
View ArticleRe: P2V conversion fails with No connection could be made because the target...
Refused connection could happens if no one listen on specified port... so you can try to install agent on source machine and try to convert it again.HTH
View ArticleRe: P2V conversion fails with No connection could be made because the target...
I ended up just installing the converter on the source. Not sure why it could never be done from another machine as I have done many of these in the past.
View ArticleRe: ISO for latest Converter 4.1 - Does it exist?
4.1 is the latest. Since it's just a winpe adk type of disc, I might be able to get 5.5 converter working. If I can do this, I will post instructions on creating one.
View ArticleCreating VM from physical Machine (8.1) - Made on Windows, attempting to run...
I had tried to create a VM image from a working Windows 8.1 system in my lab. It had a specialized developer centric configuration with some complex dependencies and layers of installs, packs, and...
View ArticleRe: Creating VM from physical Machine (8.1) - Made on Windows, attempting to...
Not the proper forum... try ESX and/or VC specific forum.
View ArticleClik here to view.
STOP error 7b subcode c0000034 after p2v with Converter 5.5.3
Hello,I have a problem with p2v conversion of one machine (Lenovo Thinkpad W530). Virtual machine gets STOP error 7b (inaccessible boot device) with subcode c0000034 (operating system not found). I run...
View ArticleRe: STOP error 7b subcode c0000034 after p2v with Converter 5.5.3
For Windows 7 select the "LSI Logic SAS" controller in the Converter Wizard. André
View ArticleRe: STOP error 7b subcode c0000034 after p2v with Converter 5.5.3
Already tried that. LSI_SCSI too. No change.
View ArticleRe: STOP error 7b subcode c0000034 after p2v with Converter 5.5.3
Just to confirm, did you select the "LSI Logic SAS" controller? André
View ArticleRe: STOP error 7b subcode c0000034 after p2v with Converter 5.5.3
Yes I did.I also made another try and selected SCSI LSI Logic (without SAS) controller and another with choosing SATA. In all cases virtual machine crashed with stop error I mentioned in first post.I...
View ArticleRe: STOP error 7b subcode c0000034 after p2v with Converter 5.5.3
Could you upload log bundle?
View ArticleRe: STOP error 7b subcode c0000034 after p2v with Converter 5.5.3
Sure I can. Here they come.
View ArticleRe: STOP error 7b subcode c0000034 after p2v with Converter 5.5.3
I was unclear, I want to check the converter's log because of drive letter change. Otherwise you should ask in workstation forum why the VM can't run.
View ArticleRe: Convert a Clustered Server
Hi RogerAli, yes, we can convert using a free VMware converter and while converting include D drive also. Note: If you found this correct or answer useful please consider the use of the Correct...
View ArticleRe: STOP error 7b subcode c0000034 after p2v with Converter 5.5.3
OK, please find attached log files bundle related to my conversion task. Druve letters are different because first screenshot was done on source (physical) machine, and the second one on virtual...
View ArticleRe: STOP error 7b subcode c0000034 after p2v with Converter 5.5.3
Everything looks fine. IMO there is other device that prevent VM to boot, not the disk controller, however I've recommend not change the defaults for disk controllers.Try to get support from...
View ArticleSupport for Ubuntu 14.04
Hi, Please do you have any ETA when there will be update to support Ubuntu 14.04Currently we need to convert few servers to VM but how... There is some "hack" way but i dont think that is an option. Or...
View ArticleRe: Remove Broadcom Team Adapter after a conversion
HI!1. Uninstall BACS.2. Add Network adapter to VM.3. In Guest OS: open Local Area Connection and uninstall Broadcom Advanced Server Program Driver.4. Reboot.
View Article