Re: Unable to convert Linux Physical Server
Hello Can you please upload the whole worker log? It is not clear from this snippet what the problem is. Regards,Plamen
View ArticleRe: Unable to convert Linux Physical Server
Here is the worker log regarding my conversion try.
View ArticleRe: An error occurred while opening a virtual disk. Verify that the converter...
They have connection to each other. As well tried to convert with both firewalls turned off. It still fails at 1%
View ArticleRe: An error occurred while opening a virtual disk. Verify that the converter...
They have connection to each other. As well tried to convert with both firewalls turned off. It still fails at 1%
View ArticleRe: An error occurred while opening a virtual disk. Verify that the converter...
They have connection to each other. As well tried to convert with both firewalls turned off. It still fails at 1%
View ArticleP2V windows server 2003
Hi All, I'm trying to do P2V to one server and I just can't pass the 1% error. " converter.fault.ManagedDiskOpenFault " I've tried all the solution that I found out there: opening all restriction...
View ArticleRe: P2V windows server 2003
Hello, Do you have tried this kb ?: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2006659 Best,
View ArticleRe: P2V windows server 2003
No. but I just tried that right now and I dont have any bad blocks or the errors that in this KB. Is there anything else that I might be missing?
View ArticleRe: P2V windows server 2003
Just tried... still not passing 1%....Would help to upload the newer logs?
View ArticleRe: P2V windows server 2003
Not sure, but maybe worth a try. Select an ESXi host as the target (if I read the logs correctly, you selected vCenter Serer!?), and also verify that the source/Windows 2003 server is able to resolve...
View ArticleRe: P2V windows server 2003
It passed the 1% finally!I've added the esxi's to the host file but not with the FQDN so I think this was the cause. Thanks,Nitai
View ArticleRe: Unable to convert Linux Physical Server
Hello, There is no '/boot' volume in the source information returned by sysinfo. Besides it reports: Error: Can't have a partition outside the disk!OTOH df has returned '/dev/sda1' as '/boot'. Is it...
View ArticleClik here to view.
Re: Unable to convert Linux Physical Server
Hum I'm definetly not a linux expert, so I don't get how df can show /boot on /dev/sda1, but that in fact it is on /dev/sda Anyway perhaps the fstab could help : # This file is edited by fstab-sync -...
View ArticleRe: Unable to convert Linux Physical Server
Hm, in the log there is the following line:2014-12-22T18:01:18.434+01:00 [09488 info 'Default'] [Converter Agent SysinfoQuery] successfully exec'ed vmware-sysinfo; result: Error: Can't have a partition...
View ArticleRe: Unable to convert Linux Physical Server
Thank both of you. I will talk next week with the owner of this physical machine to find out if this risk is too high or if it worth it.I will let you know the result of our discussion.
View ArticleRe: Permission to perform this operation was denied
Hi Plamen,and thank you for you response.I have managed to visit the client today and here are new logs from the failed conversion. I will rule out Firewall between the Source Physical server and the...
View ArticleMigrating a physical PC (Microsort Vista Pro x64) to a virtual machine with...
HiI try since two days to do this conversion. I have already installed the converter,disabled anti virus and firewall on Windows and activated sharing on Macintosh.I have stopped the first try (this...
View Article