Re: XenServer 5.6 - CentOS/RHEL (xen-kernel) VMS to ESXi 5.5
Hello If you boot the regular, non paravirtual kernel, you should be able to do a normal conversion w/o manual reconfig afterwards.Converter always creates SCSI disks on the destination machine, this...
View ArticleRe: Error: Unable to locate the required Sysprep files
This is a very old thread but I've just followed the steps to resolve this issue for an old Windows Server 2003 SP2 Server that I am P2V'ing and it worked a treat :-)
View ArticleRe: XenServer 5.6 - CentOS/RHEL (xen-kernel) VMS to ESXi 5.5
Hey, Gave me a few ideas for this and I've got a VM from Xen running in my ESXi environment now! It's a juggling act for now, but it's once of so I'll deal with it for now.For anyone out there, perhaps...
View ArticleVMWare Converter not picking up local 173 GB raid 5 disk on WIndows 2003 32 bit
Hi We have a Dell 6850 running hardware raid. Two drives are raid 1 for operating system. The remainder of the disks are in a raid 5 group for SAP data. For reasons unknown, when we run the converter...
View ArticleRe: VMWare Converter not picking up local 173 GB raid 5 disk on WIndows 2003...
The RAID disks are not supported by Converter.About reason for skipping J: you should look in worker log, or agent log in case of remote machine.Otherwise you can upload log bundle for check.
View ArticleRe: VMWare Converter not picking up local 173 GB raid 5 disk on WIndows 2003...
Is it software RAID or Hardware one? (I mean raid created in OS diskmgmt.msc or not) I remember limitation with vCenter converter failed to detect RAID with Linux machines. VMware KB: vCenter...
View ArticleRe: VMWare Converter not picking up local 173 GB raid 5 disk on WIndows 2003...
The reason is in log file. What about them?
View ArticleRe: Error: Unable to locate the required Sysprep files
Thank you very much for the information. It has solved my problem.Emmannuel DarwinSeo - MarketerMiel de Manuka
View ArticleNeed pre and post checklists for P2V and later moving it to AWS cloud or...
Hi, Could someone assist me to share documents on pre and post checklists for P2V and later moving it to AWS cloud or Azure cloud Thanks in advance
View ArticleRe: Question: With the new standalone converter how do you do a Cold P2V?...
I still use latest Converter for Cold Clones.Procedure in short: use a LiveCD with iSCSI-support to boot the target system.Create a new VM that uses the target drive as a RDM.Run Converter against the...
View ArticleAn error occurred while opening a virtual disk. Verify that the converter...
I am trying to convert a virtual machine located on hyper v to vcenter using the standalone converter located on another server. I get this error when It fails at 1%. The correct ports are open as well.
View ArticleRe: An error occurred while opening a virtual disk. Verify that the converter...
Welcome to the Community, as a first step, please check whether the source VM on the Hyper-V host is able to resolve the vCenter Server's as well as the ESXi host's FQDNs. André
View ArticleRe: An error occurred while opening a virtual disk. Verify that the converter...
Another note this is a powered off conversion. So connecting to hyper V grabbing a powered off vm and trying to convert it onto vcenter.
View ArticleRe: An error occurred while opening a virtual disk. Verify that the converter...
Hello, these are UI logs only. Please upload the whole task bundle.
View ArticleRe: An error occurred while opening a virtual disk. Verify that the converter...
In this case you should verify that the Hyper-V server has network connectivity to the destination ESX server on ports 443 and 902
View ArticleClik here to view.
Re: FAILED: Unable to create a VSS snapshot of the source volume(s). Error...
I know this is a really old post; however, I still ran into this issue many years later and have found a solution. I was converting a 32 bit Windows 7 machine that was already a VM - I simply wanted...
View ArticleClik here to view.
Re: Cannot hot convert a physical Windows 7 x64 machine to a Vmware...
I know this is a really old post; however, I still ran into this issue many years later and have found a solution. I was converting a 32 bit Windows 7 machine that was already a VM - I simply wanted...
View ArticleUnable to convert Linux Physical Server
Hi, I'm trying to convert a Linux Physical Machine with the vCenter Converter Standalone 5.5.3 but it always fails at the beggining (VmCreationFault.summary).Everything's ok concerning communications...
View ArticlePermission to perform this operation was denied
Hi Guys,I have problem converting physical servers with Converter Standalone 5.5 I get the mentioned error - Permission to perform this operation was denied Previously I have managed to do the...
View ArticleRe: Permission to perform this operation was denied
Hi Ivo the error I see is:2014-12-22T12:42:11.237+01:00 [02288 warning 'Default'] [,0] [NFC ERROR] NfcNewAuthdConnectionEx: Failed to connect to peer. Error: Failed to connect to server...
View Article