Re: C# sdk fails to submit the P2V job for linux clone
Hmm, looks like these samples don't work correctly with Linux :-(I recommend using the enhanced samples mentioned earlier. In this case you may try to fix it (but perhaps other issue could occur...
View ArticleClik here to view.
Re: Ports to be opened for P2V
Thank you Richardson! Appreciate your response, this is exactly what I needed to know I can telnet to port 443 using the vCenter server cluster IP and telnet to port 902 to one of the hosts in the...
View ArticleRe: C# sdk fails to submit the P2V job for linux clone
Hi plamen, I downloaded and tried the Enhanced C# code, I run into same thumbprint issue there too, am i missing something, Executing operation 'Convert' from properties file...
View ArticleRe: C# sdk fails to submit the P2V job for linux clone
Hi vigneshrams I don't know what wrong is happening, some debugging is needed.As a workaround you can put the fingerprint in the properties file beforehand. HTHPlamen
View ArticleConvert Hyper-V to VMare, no access to VMWare server
I run a Windows 2008 R2 Hyper-V host internally that is running a Linux VM. I need to convert the Linux Hyper-V VM to a VMware VM so that I can give it to a client running VMware. The VMware vCenter...
View ArticleVMWare Converter 5.52 fails at 96% - unable to create ... $ReConfig$
Hi, I have tried to convert a Win7 32 bit desktop several times. It worked once but then I noticed the VMWare tools option so would like to do it again. After 5 tries, it keeps failing at 96% with a...
View ArticleRe: VMWare Converter 5.52 fails at 96% - unable to create ... $ReConfig$
Have you tried to boot the failed Windows 7 VM?
View ArticleVMware converter routing across subnets
Hello, I apologize if this has already been answered. I am also relatively new to VMware stuff. Here is the problem, I have a vcenter converter standalone installed on my laptop (windows7 pro) which is...
View ArticleRe: VMware converter routing across subnets
Who is the "destination 192.168.1.0/24" ? Another ESXi host ? What if you install VMware Converter directly on source machine ?
View ArticleRe: VMware converter routing across subnets
Destination is Synology NAS at 192.168.1.11/24.I do have converter installed on the source machine and it works fine.
View ArticleRe: VMWare Converter 5.52 fails at 96% - unable to create ... $ReConfig$
Yes, I have tried this before and it comes up with a blue screen but never activates. I have seem many posts about VMware converter failing with this message but cannot find what the solution is. I...
View ArticleRe: Convert Hyper-V to VMare, no access to VMWare server
There is only one method to convert live Linux - against ESX/VC server, there are few ports that needs to be opened, see User's Manual.For HyperV 2008 there is a possibility to convert powered off VM...
View ArticleRe: VMWare Converter 5.52 fails at 96% - unable to create ... $ReConfig$
What version of converter you are using? There is version 5.5 already, check with latest one.Could you upload log bundle to check for problem?
View ArticleRe: C# sdk fails to submit the P2V job for linux clone
Hi plamen, i used the thumbprint in properties file and i was successful in submitting the ob to the converter. But when i try to assign ip for the helper VM (Linux P2V). The ip is not setting...
View ArticleRe: VMWare Converter 5.52 fails at 96% - unable to create ... $ReConfig$
I Am using Vmware converter v5.52 which is the latest version. Attached are the export logs. I will start the download again. Let me know if you find anything. Thanks
View ArticleRe: VMWare Converter 5.52 fails at 96% - unable to create ... $ReConfig$
The problems I see in logs are:2014-09-18T10:36:15.948+10:00 [04520 error 'task-3'] [BaseDiskSetComputer::AnalyzeErrorAndThrow] Error occurred when opening disk set, MNTAPI_ERROR = 16258 MNTAPI...
View ArticleRe: VMWare Converter 5.52 fails at 96% - unable to create ... $ReConfig$
Thanks Poceh. I tried again and this time it worked with no issues even with firewall and virus scanner on.
View Articleunable to create a vss snapshot of the source volume error code 2147754753...
I'm trying to do P2V for our active directory domain controller. The source machine is a windows 2008 R2. I'm getting a VSS error on the DC. I'm seeing this error in converter. "Unable to create a VSS...
View ArticleClik here to view.
Re: unable to create a vss snapshot of the source volume error code...
this might be caused because of windows backup issue. check volume shadow copy dependencies are running if not start those services.
View ArticleClik here to view.
Re: unable to create a vss snapshot of the source volume error code...
My VSS is in automatic mode and is started. I ran it again but still no luck. But one thing i notices that I can see only one dependency for my VSS.
View Article