Re: Unable to update boot.ini on the destination machine's system volume -...
Your problem is:[#1] [2013-07-15 19:20:52.595 10580 warning 'App'] Failed to get info for \\.\PhysicalDrive0: error Read \\.\PhysicalDrive0 disk layout: Incorrect function (1)You need to find out what...
View ArticleRe: esx5.0 p2v failing at 1% with 'Unknown exception'
Can you connect to the destination ESX server from the source machine on port 902?
View ArticleRe: Unable to update boot.ini on the destination machine's system volume -...
Too many and different cases, can't say, but you can check the Converter's forum for "PhysicalDrive0" and look at your machine, most often this could be: antivirus or encription software... HTH
View ArticleRe: esx5.0 p2v failing at 1% with 'Unknown exception'
Yes, From Physical machine we need to telnet the Esx Server Ip address with the port Number 902.If its telnet then there is no issue connection between Physical -ESX Server . I
View Articleerror 209 (type 1 code 13)
My server gets to about 94% and fails with error 209 (type 1 code 13) . Much of my research says that it is a bad block on my disk array. I ran chkdsk and it didn't come back with any problems. The...
View ArticleRe: error 209 (type 1 code 13)
Nope, this is not possible, use USB stick or SMB/network drive.
View ArticleRe: error 209 (type 1 code 13)
I am going to try Disk2VHD. Reading really quickly it sounds as if that one will work. Then I can v2v to Vmware.
View ArticleRe: "a general system error occurred coverter.fault.SysinfoQueryLinuxFault"
HiYou can install on windows physical machine and install stand alone convertor 4.0 and try it
View ArticleRe: P2V Dynamic Disks
We can try using stand alone convertor 5.0 ,We can select particular disk C or D Drive for testng purpose
View ArticleRe: "a general system error occurred coverter.fault.SysinfoQueryLinuxFault"
Just download and use the latest Converter 5.1HTH
View ArticleRe: error 209 (type 1 code 13)
I did run chkdsk but it didn't discover any errors. I think my problem is either that I am running out of disk space or the fact that I am trying to do the P2V to the same local C: drive as the server.
View ArticleRe: error 209 (type 1 code 13)
When performing P2V conversions Converter creates a VSS snapshot on the source server. By default the amount of space used for VSS snapshots is set to a small percent of the disk free space. When you...
View ArticleRe: error 209 (type 1 code 13)
So it is possible to P2V a live and running server to a local drive(provided there is enough space)? For example ServerX.domain.local with a C: of 500GB can be P2Ved into a c:\myServerX\ If so is it...
View ArticleVM converter error while moving a virtual machine to another esxi 5.1 server
Hello,I trying to copy a vm that's on an old amd processor to another system with a newer socket amd processor using the latest vm converter standalone. I get the following error "Unable to validate...
View ArticleRe: VM converter error while moving a virtual machine to another esxi 5.1 server
Could you upload some logs?
View ArticleRe: VM converter error while moving a virtual machine to another esxi 5.1 server
Are you getting a read /write error messages ?
View ArticleRe: VM converter error while moving a virtual machine to another esxi 5.1 server
On the road but will send the logs. Which one do you need? Thanks Sent from my Windows Phone
View ArticleConverting Hyper-v to Vmware using the vmware converter
Hi, I am looking for some support wrt using the converter for converting VM's created in Hyper-V to VMware. What happens to the Hyper-V tools? Will the Data be secure? Will the drives be the same? Can...
View Article