The interface has been changed, After selecting his profile, select 'documents' on the top menu bar, then 'uploaded file' on the left. Select the 'hidden' radio button to make it private (I haven't actually tested it)

Hi I am experiencing issues after I have P2v hyper-v vm's to esxi 5.5 the migration process I am performing is p2v and not v2v as I need the migrate the customers existing iscsi drives mapped to the hyper-v host. Anyway his works fine however when I power up the migrated machine install VMware tools and remove the old nics I get dropped pings using the original IP address. However if I change the ip to something new  this ping fine. I had this on all 3 VMS I have converted and all different os levels windows 2012, windows 7 and windows 2008.

I am thinking this is maybe some cached either in the original hyper-v host or on the network. Anyone had this before or know how to resolve.

Many thanks

If you think it is cached , Go the Device manager --> tools --> view hidden devices

go to network adapter and remove the hidden or removed adapters from the server , (the hidden one will be grayed out , ) once you do that you will have the original NIC attached to the server functional

Hi thanks for your reply I tried this last night and removed the used nic's which where greyed out as I read this on a VMware KB article. This did not seem to make a difference even with a reboot after.

If there anywhere else where the old IP might be held in the VM? Tonight I am going to test by isolating the network to make sure that its not a switch issue. I will try pinging VM's which are on the same vSwitch. 

I think I have found the cause of this issue.

I have an ESXi server that has multiple vswitches so that I can dual home guests or provision which VLAN the guests land on.

When trying to P2V a linux server onto this host, I encounter this issue.

The P2V process from Linux includes creating a temp guest that boots with the live cloning tools to begin the conversion.

After which, the temp becomes the newly converted virtual guest.

What I've discovered is that at this stage, the temporary cloning OS ends up with the default vSwitch that may not be able to communicate back to the physical server.

You can see this by editing the guest whilst stuck at logon, and look at the network that gets allocated.

My issue now is that there is no 'Converter' option to specify the vswitch network that the cloning tool should use.

There is an option to specify the network for the new guest... once converted but this is not applied at this stage.

Essentially... there is a bug with the conversion process as it should if you an IP Helper config to select a vSwitch/Network.

So... I need to think of how to change the default vswitch.

I'm sure if this helps anyone or me right now but thought I'd share.

Hi,

Some question to come to the conclusion

1) Are you able to ping gateway after providing the IP address from the virtual machine ?

2) If you are trying to ping the VM with its hostname then to which IP address its showing ?

3) Trying to provide IP address having issue and then run a tracert through command prompt and check where its getting stuck

4) There are chances where you have registered the IP address and hostname in DNS server because of which it might getting clashes between the Old IP and VM name ?

Austin ,

try clearing the DNS entries, and flush the DNS entries

Make sure no Duplicate entries are not made for the two new VM

Thanks all - Will try some of these and let you know how I get on tonight.  Cheers

OK... perhaps there are a number of things going on here.

I changed the adapter NIC for the new host to be E1000 and did not connect the second NIC on power up.

By checking the guest propertise, I compare the MAC address to these DHCP scope leases and could test by ping the IP that was release to it.

When it doesn't ping... it's not gonna clone.

The Physical linux server also has 2 NIS and originally I left them both in.

It also appeared to work after having two nics but leaving the second one set to Not connect on boot.

With only one... it works so I'm sure it's getting confused at this stage..

One thing to note... when it does work and connect to the network correctly... and the converter begins to progress... the guest console will continue to displace the prompt to login.

So make sure you check the progress of the converter when testing.

Hope this helps.

As mentioned in my other thread, hot cloning results in NTFS file system corruption and a disk check on first boot of the migrated server that always has to delete a bad attribute record in the $J. So it is not hot cloning NTFS correctly no matter what I do.

Since it appears I cannot do WinPE conversion, I am going to have to do the next step down the rung for offline cold cloning.

File Server: Dell PowerEdge 2900

- Two RAID-5, one OS boot 73g x2, one data drive 300g x4

- Running Server 2008 R2 SP1

Install VMWare Tools on Server 2008, to preinstall VM drivers.

Insert another spare SAS hard drive

  - in controller, configure as RAID-0

  - in controller, set this as boot drive

Install basic Windows 7 DVD on this drive

Install Standalone Converter on  Windows 7

Clone to VMWare ESXi 5.5

In cloned machine

  - Delete the Windows 7 VMDK

  - Configure migrated VM settings manually

Boot from the original Server 2008 R2 disk, which has not been twiddled by Converter but copied raw to the VMDK.

IMO the NTFS on the source is corrupted and needs repair, try the chkdsk /R and then convert again.

Hello,

I'm trying to run a P2V conversion of a Hyper-V machine. The agent gets installed correctly, then at the "Connecting to source machine" step i receive the following error: "A general system error occurred: Operation timed out".

I'm able to telnet to the source machine on a port 9089. Berow are excerpts from the Converter logs (domain and user info replaced with #####\#####)...

I desperately need to enable this conversion process, so any help will be appreciated.

Some technical info:

• hyper-v 2.0
• guest machine OS: Windows 2008 R2
• vcenter 5.5
• hosts - esxi 5.1
• vcenter converter 5.1.0
• all relevant ports open, local firewall disabled

vmware-converter-agent-1.log

Section for VMware vCenter Converter Standalone, pid=7112, version=5.1.0, build=1087880, option=Release

2015-06-26T17:04:01.283+02:00 [05880 info 'Default'] Logging uses fast path: true

2015-06-26T17:04:01.283+02:00 [05880 info 'Libs'] VThreadBase detected multiple threads.

2015-06-26T17:04:01.283+02:00 [05880 info 'Default'] Handling bora/lib logs with VmaCore facilities

2015-06-26T17:04:01.283+02:00 [05880 info 'Default'] Initialized channel manager

2015-06-26T17:04:01.283+02:00 [05880 info 'Default'] Current working directory: C:\Program Files (x86)\VMware\VMware vCenter Converter Standalone Agent

2015-06-26T17:04:01.283+02:00 [05880 info 'Default'] ThreadPool windowsStackImmediateCommit = true

2015-06-26T17:04:01.283+02:00 [05020 info 'ThreadPool'] Thread enlisted

2015-06-26T17:04:01.283+02:00 [05880 info 'ThreadPool'] Thread enlisted

2015-06-26T17:04:01.283+02:00 [02372 info 'ThreadPool'] Thread enlisted

2015-06-26T17:04:01.283+02:00 [02368 info 'ThreadPool'] Thread enlisted

2015-06-26T17:04:01.283+02:00 [05880 info 'Default'] Trying converter_agent

2015-06-26T17:04:01.393+02:00 [05880 info 'Default'] Trying ufa_agent

2015-06-26T17:04:01.393+02:00 [05880 info 'Ufa'] Initializing SSL context

2015-06-26T17:04:02.408+02:00 [05880 info 'Default'] Vmacore::InitSSL: handshakeTimeoutUs = 20000000

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa'] Plugin initialized

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa.HTTPService'] Setting buffer size to 32768

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa.HTTPService'] Using default for nonChunkingAgents: 'VMware VI Client|VMware-client|VMware-client/3.*'

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa.HTTPService'] Using default for agentsNeedingContentLength: 'VMware-client'

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa.HTTPService'] Max buffered response size is 104857600 bytes

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa'] enableChunkedResponses: true

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa.HTTPService'] Http Service started: [class Vmacore::Ssl::SSLServerSocketImpl:01C44250]

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa'] Soap (over TCP) started on port 9089. enableRemoteAccess = true, useSSL = true

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa'] SOAP pipe name: \\.\pipe\vmware-converter-agent-soap

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa.HTTPService'] Setting buffer size to 32768

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa.HTTPService'] Using default for nonChunkingAgents: 'VMware VI Client|VMware-client|VMware-client/3.*'

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa.HTTPService'] Using default for agentsNeedingContentLength: 'VMware-client'

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa.HTTPService'] Max buffered response size is 104857600 bytes

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa'] enableChunkedResponses: true

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa.HTTPService'] Http Service started: [class Vmacore::Ssl::SSLServerSocketImpl:01C440A0]

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa'] Soap (over Named Pipe) started on pipe \\.\pipe\vmware-converter-agent-soap. enableRemoteAccess = true, nonRootAccess = false, useSSL = true

2015-06-26T17:04:02.408+02:00 [05880 info 'Ufa'] Plugin started

2015-06-26T17:04:02.439+02:00 [05880 info 'Default'] DiskLibProvider init - OK

2015-06-26T17:04:02.439+02:00 [05880 info 'Default'] Mntapi_Init Asked - 2.0 Served - 2.0 was successful,TempDirectory: C:\Windows\TEMP\vmware-temp\vmware-SYSTEM.

2015-06-26T17:04:02.439+02:00 [05880 info 'Default'] [serviceWin32,416] vmware-converter-agent service started

2015-06-26T17:04:25.369+02:00 [05880 error 'Ufa.HTTPService'] accept failure class Vmacore::TimeoutException(Operation timed out) on stream (null)

2015-06-26T17:04:25.369+02:00 [05880 error 'Ufa.HTTPService'] stream is NULL - no read scheduled

2015-06-26T17:05:45.687+02:00 [05880 error 'Ufa.HTTPService'] accept failure class Vmacore::TimeoutException(Operation timed out) on stream (null)

2015-06-26T17:05:45.687+02:00 [05880 error 'Ufa.HTTPService'] stream is NULL - no read scheduled

vmware-converter-worker-7.log

2015-06-26T17:01:15.809+02:00 [01468 verbose 'Default'] Converter Worker ServiceInstance RetrieveContent

2015-06-26T17:01:15.824+02:00 [01468 verbose 'Default'] Converter Agent SessionManager GetPid

2015-06-26T17:01:15.824+02:00 [01468 verbose 'Default'] Converter Agent SessionManager ImpersonateUser

2015-06-26T17:01:15.840+02:00 [01468 info 'Default'] Impersonating user #####\##### in session 074a0bd9-9f68-e4ff-e776-c98023e2e62c

2015-06-26T17:01:35.247+02:00 [01468 verbose 'Default'] ConverterConnection: Creating SSL SOAP stub adapter to hostname 10.192.23.63 port 9089

2015-06-26T17:01:35.247+02:00 [01468 verbose 'HttpConnectionPool-000000'] HttpConnectionPoolImpl created. maxPoolConnections = 20; idleTimeout = 900000000; maxOpenConnections = 20; maxConnectionAge = 0

2015-06-26T17:01:36.259+02:00 [01472 warning 'Default'] Failed to connect socket; <io_obj p:0x01186a80, h:684, <TCP '0.0.0.0:0'>, <TCP '10.192.23.63:9089'>>, e: system:10061(No connection could be made because the target machine actively refused it)

2015-06-26T17:01:36.319+02:00 [01472 error 'HttpConnectionPool-000000'] [ConnectComplete] Connect failed to <cs p:004c0ae0, TCP:10.192.23.63:9089>; cnx: (null), error: class Vmacore::SystemException(No connection could be made because the target machine actively refused it)

2015-06-26T17:01:36.479+02:00 [01468 verbose 'Default'] ConverterConnection: Stopping keepalive

2015-06-26T17:01:36.479+02:00 [01468 verbose 'Default'] ConverterConnection: Keepalive not started.

2015-06-26T17:01:36.480+02:00 [01468 info 'vmomi.soapStub[0]'] Resetting stub adapter for server <cs p:004c0ae0, TCP:10.192.23.63:9089> : Closed

2015-06-26T17:01:38.113+02:00 [01460 info 'Default'] [AgentManager] Install Agent on 10.192.23.63

2015-06-26T17:01:38.176+02:00 [01460 info 'Default'] [ufaUtilsWin32,208] Connecting to ADMIN$ on 10.192.23.63 as #####\#####

2015-06-26T17:01:38.363+02:00 [01460 info 'Default'] [ufaUtilsWin32,211] Successfully connected to ADMIN$ on 10.192.23.63

2015-06-26T17:01:38.363+02:00 [01460 verbose 'Default'] [AgentDeployment] Copy C:\Program Files (x86)\VMware\VMware vCenter Converter Standalone\VMware-Converter-Agent.exe to ADMIN$\vmware-converter-install-gufxqlypitvhziym on 10.192.23.63

2015-06-26T17:03:55.721+02:00 [01460 warning 'Default'] [AgentDeployment] Wait install process to complete

2015-06-26T17:04:04.863+02:00 [01460 verbose 'Default'] Getting extra error code information from Installer's output file ...

2015-06-26T17:04:04.878+02:00 [01460 verbose 'Default'] [AgentDeployment] Local vmsystemp file name is C:\Windows\TEMP\vmware-temp\vmware-al-4239\vmsystemp.txt.mmxjziodprxwhzwl

2015-06-26T17:04:04.894+02:00 [01460 verbose 'Default'] [AgentDeployment] Got remote vmsystemp.txt file

2015-06-26T17:04:04.894+02:00 [01460 verbose 'Default'] [AgentDeployment] Got file line: Time=06/26/15 17:04:02

2015-06-26T17:04:04.894+02:00 [01460 verbose 'Default'] [AgentDeployment] Got file line:

2015-06-26T17:04:04.894+02:00 [01460 verbose 'Default'] [AgentDeployment] Got file line: Reboot=0

2015-06-26T17:04:04.894+02:00 [01460 verbose 'Default'] [AgentDeployment] Got file line:

2015-06-26T17:04:04.894+02:00 [01460 verbose 'Default'] [AgentDeployment] Got file line: Error=0

2015-06-26T17:04:04.894+02:00 [01460 verbose 'Default'] [AgentDeployment] Got file line:

2015-06-26T17:04:04.894+02:00 [01460 verbose 'Default'] [AgentDeployment] Got file line: SHA1 Fingerprint=0F:55:93:6F:0E:3F:F9:E5:CF:21:61:4B:52:B1:0E:B9:2E:67:2D:BF

2015-06-26T17:04:04.894+02:00 [01460 warning 'Default'] [AgentDeployment] Cannot match line Time=06/26/15 17:04:02

--> , skip it

2015-06-26T17:04:04.894+02:00 [01460 verbose 'Default'] [AgentDeployment] Skipping comment line:

-->

2015-06-26T17:04:04.894+02:00 [01460 info 'Default'] [AgentDeployment] Got reboot tag from output file as 0

2015-06-26T17:04:04.894+02:00 [01460 verbose 'Default'] [AgentDeployment] Skipping comment line:

-->

2015-06-26T17:04:04.894+02:00 [01460 info 'Default'] [AgentDeployment] Got error code from output file as 0

2015-06-26T17:04:04.894+02:00 [01460 verbose 'Default'] [AgentDeployment] Skipping comment line:

-->

2015-06-26T17:04:04.894+02:00 [01460 info 'Default'] [AgentDeployment] Got ssl thumbprint from output file as 0F:55:93:6F:0E:3F:F9:E5:CF:21:61:4B:52:B1:0E:B9:2E:67:2D:BF

2015-06-26T17:04:04.894+02:00 [01460 verbose 'Default'] Using installer's output file to update error code

2015-06-26T17:04:04.894+02:00 [01460 warning 'Default'] [AgentDeployment] Using installer's output file to update error code

2015-06-26T17:04:05.081+02:00 [01460 info 'Default'] [ufaUtilsWin32,81] Disconnecting 10.192.23.63 on ADMIN$

2015-06-26T17:04:05.081+02:00 [01460 verbose 'Default'] [AgentDeployment] succeeded, reboot not required

2015-06-26T17:04:05.113+02:00 [01460 verbose 'Default'] ConverterConnection: Creating SSL SOAP stub adapter to hostname 10.192.23.63 port 9089

2015-06-26T17:04:25.167+02:00 [01468 error 'HttpConnectionPool-000000'] [ConnectComplete] Connect failed to <cs p:004c0ae0, TCP:10.192.23.63:9089>; cnx: (null), error: class Vmacore::TimeoutException(Operation timed out)

2015-06-26T17:04:25.167+02:00 [01460 verbose 'Default'] ConverterConnection: Stopping keepalive

2015-06-26T17:04:25.167+02:00 [01460 verbose 'Default'] ConverterConnection: Keepalive not started.

2015-06-26T17:04:25.168+02:00 [01460 info 'vmomi.soapStub[1]'] Resetting stub adapter for server <cs p:004c0ae0, TCP:10.192.23.63:9089> : Closed

2015-06-26T17:04:25.168+02:00 [01460 warning 'vmomi.soapStub[1]'] Terminating invocation: server=<cs p:004c0ae0, TCP:10.192.23.63:9089>, moref=converter.ServiceInstance:ConverterAgentServiceInstance, method=retrieveContent

2015-06-26T17:04:25.168+02:00 [01460 error 'Default'] class Vmacore::TimeoutException(Operation timed out)

Hi,

Have you installed Converter agent in the source machine,

If NOT  :- Install it .....

If YES  :- Then refused connection could happens if no one listen on specified port... so you can try to  re-install agent (uninstall completely --> reboot --> install )on source machine and try to convert it again.

Hello

I want to clarify something (you probably got it right, but just in case). When you convert a powered off Hyper-V VM, the agent should run in the Hyper-V server, when you convert a powered on VM - it should run in the VM itself.

I assume you have the second case. According to the logs the agent has been installed correctly. This means converter has access to the source machine. Perhaps it could not connect to the agent afterwards (the "class Vmacore::TimeoutException(Operation timed out)" message is misleading, the issue is somewhere else). Check whether a firewall (internal in the source or external) does not prevent the connection.

HTH

Plamen

P.S. Attach the whole log if this doesn't help

That took about 7 hrs, but chkdsk /f /r found no problems.

"Can't check while system is running, do you want to run at boot time?" Yes

======================================================

Checking file system on E:

The type of the file system is NTFS.

Volume label is Vol1.

A disk check has been scheduled.

Windows will now check the disk.                      

CHKDSK is verifying files (stage 1 of 5)...

  1837056 file records processed.

File verification completed.

  290 large file records processed.

  0 bad file records processed.

  0 EA records processed.

  0 reparse records processed.

CHKDSK is verifying indexes (stage 2 of 5)...

  2159740 index entries processed.

Index verification completed.

  0 unindexed files scanned.                                  

  0 unindexed files recovered.                                    

CHKDSK is verifying security descriptors (stage 3 of 5)...

  1837056 file SDs/SIDs processed.                                      

Cleaning up 1 unused index entries from index $SII of file 0x9.

Cleaning up 1 unused index entries from index $SDH of file 0x9.

Cleaning up 1 unused security descriptors.

Security descriptor verification completed.

  161343 data files processed.

CHKDSK is verifying Usn Journal...

  1247696 USN bytes processed.

Usn Journal verification completed.

CHKDSK is verifying file data (stage 4 of 5)...

  1837040 files processed.

File data verification completed.

CHKDSK is verifying free space (stage 5 of 5)...

  51383118 free clusters processed.

Free space verification is complete.

Windows has checked the file system and found no problems.

877261823 KB total disk space.

669301384 KB in 1252589 files.

    493516 KB in 161344 indexes.

        0 KB in bad sectors.

  1934451 KB in use by the system.

    65536 KB occupied by the log file.

205532472 KB available on disk.

      4096 bytes in each allocation unit.

219315455 total allocation units on disk.

51383118 allocation units available on disk.

Internal Info:

00 08 1c 00 39 93 15 00 6e 1c 1f 00 00 00 00 00  ....9...n.......

e6 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

==============================================

Checking file system on C:

The type of the file system is NTFS.

A disk check has been scheduled.

Windows will now check the disk.                        

CHKDSK is verifying files (stage 1 of 5)...

  199936 file records processed. 

File verification completed.

  889 large file records processed.

0 bad file records processed.

0 EA records processed. 

104 reparse records processed.

CHKDSK is verifying indexes (stage 2 of 5)...

  262022 index entries processed.

Index verification completed.

  0 unindexed files scanned. 

  0 unindexed files recovered.

CHKDSK is verifying security descriptors (stage 3 of 5)...

  199936 file SDs/SIDs processed.

Cleaning up 14 unused index entries from index $SII of file 0x9.

Cleaning up 14 unused index entries from index $SDH of file 0x9.

Cleaning up 14 unused security descriptors.

Security descriptor verification completed.

  31044 data files processed.

CHKDSK is verifying Usn Journal...

  1300704 USN bytes processed.

Usn Journal verification completed.

CHKDSK is verifying file data (stage 4 of 5)...

  199920 files processed.

File data verification completed.

CHKDSK is verifying free space (stage 5 of 5)...

  4907791 free clusters processed.

Free space verification is complete.

Windows has checked the file system and found no problems.

  70936575 KB total disk space.

  50939880 KB in 152681 files.

     94320 KB in 31045 indexes.

         0 KB in bad sectors.

    271211 KB in use by the system.

     65536 KB occupied by the log file.

  19631164 KB available on disk.

      4096 bytes in each allocation unit.

  17734143 total allocation units on disk.

   4907791 allocation units available on disk.

Internal Info:

00 0d 03 00 ba cd 02 00 5f 1d 05 00 00 00 00 00  ........_.......

da 00 00 00 68 00 00 00 00 00 00 00 00 00 00 00  ....h...........

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

Windows has finished checking your disk.

Please wait while your computer restarts.

======================================================

I see:

Cleaning up 1 unused index entries from index $SII of file 0x9.

Cleaning up 1 unused index entries from index $SDH of file 0x9.

Cleaning up 1 unused security descriptors.

and:

Cleaning up 14 unused index entries from index $SII of file 0x9.

Cleaning up 14 unused index entries from index $SDH of file 0x9.

Cleaning up 14 unused security descriptors.

So you could try to convert again.

HTH

I got the same result.... Cross-linked files on drive C:  but no problems on drive E:

This was found just doing the "lightweight" chkdsk /f

Due to that I'm not going to bother doing a 6-hour long  /f /r on the copied VM.

Onward to Windows 7 Extra-disk cold cloning, and if that too fails, then I'm going to have to do the traditional route: build a new server, migrate via robocopy.

==============================

Checking file system on E:

The type of the file system is NTFS.

Volume label is Vol1.

A disk check has been scheduled.

Windows will now check the disk.                    

CHKDSK is verifying files (stage 1 of 3)...

  1837056 file records processed.  

File verification completed.

  290 large file records processed.

0 bad file records processed.

0 EA records processed.

0 reparse records processed.

CHKDSK is verifying indexes (stage 2 of 3)...

  2159740 index entries processed.

Index verification completed.

  0 unindexed files scanned.

0 unindexed files recovered.

CHKDSK is verifying security descriptors (stage 3 of 3)...

  1837056 file SDs/SIDs processed.

Cleaning up 1 unused index entries from index $SII of file 0x9.

Cleaning up 1 unused index entries from index $SDH of file 0x9.

Cleaning up 1 unused security descriptors.

Security descriptor verification completed.

  161343 data files processed.

CHKDSK is verifying Usn Journal...

  121504 USN bytes processed.

Usn Journal verification completed.

Windows has checked the file system and found no problems.

877261823 KB total disk space.

672696176 KB in 1252608 files.

    493516 KB in 161344 indexes.

        0 KB in bad sectors.

  1933363 KB in use by the system.

    65536 KB occupied by the log file.

202138768 KB available on disk.

      4096 bytes in each allocation unit.

219315455 total allocation units on disk.

  50534692 allocation units available on disk.

Internal Info:

00 08 1c 00 4c 93 15 00 94 1c 1f 00 00 00 00 00  ....L...........

e6 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

================================

Checking file system on C:

The type of the file system is NTFS.

A disk check has been scheduled.

Windows will now check the disk.                      

CHKDSK is verifying files (stage 1 of 3)...

Attribute record of type 0x80 and instance tag 0x4 is cross linked starting at 0x3c58 for possibly 0x1 clusters.

Some clusters occupied by attribute of type 0x80 and instance tag 0x4 in file 0x78bc is already in use.

Deleting corrupt attribute record (128, "") from file record segment 30908.

  199936 file records processed. 

File verification completed.

  892 large file records processed.

0 bad file records processed.

0 EA records processed.

104 reparse records processed.

CHKDSK is verifying indexes (stage 2 of 3)...

  262100 index entries processed.

Index verification completed.

  0 unindexed files scanned.

0 unindexed files recovered.

CHKDSK is verifying security descriptors (stage 3 of 3)...

  199936 file SDs/SIDs processed.  

Cleaning up 21 unused index entries from index $SII of file 0x9.

Cleaning up 21 unused index entries from index $SDH of file 0x9.

Cleaning up 21 unused security descriptors.

Security descriptor verification completed.

Inserting data attribute into file 30908.

  31084 data files processed.

CHKDSK is verifying Usn Journal...

  1171544 USN bytes processed.

Usn Journal verification completed.

CHKDSK discovered free space marked as allocated in the volume bitmap.

Windows has made corrections to the file system.

  70936575 KB total disk space.

  58966664 KB in 152713 files.

    94372 KB in 31084 indexes.

        0 KB in bad sectors.

    271215 KB in use by the system.

    65536 KB occupied by the log file.

  11604324 KB available on disk.

      4096 bytes in each allocation unit.

  17734143 total allocation units on disk.

  2901081 allocation units available on disk.

Internal Info:

00 0d 03 00 02 ce 02 00 ed 1d 05 00 00 00 00 00  ................

d9 00 00 00 68 00 00 00 00 00 00 00 00 00 00 00  ....h...........

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

Windows has finished checking your disk.

Please wait while your computer restarts.

Hello All;

I just P2V the entire environment over the past week and must say YAY except for 1 pain in the rear end!  I have a Windows Server 2012 running Hyper-V. I was able to P2V the entire server and now I'm getting the following error:

"Virtual Machine <Name> could not be started because the hypervisor is not running"

Now after hours of googling, I've tried the following:

• Adding "hypervisor.cpuid.v0 = "FALSE" to the VMX file of the virtual machine host
• bcdedit /set hypervisorlaunchtype auto    and restarted with no luck. 

Need some insight please to get the 5 Hyper-V virtual servers running.
Thank You

also ran the following

wmic OS Get DataExecutionPrevention_Available

& DEP is TRUE

forgot to mention. 

Host is a Dell R720 runnign ESXi5.1 current version.