Quantcast
Channel: VMware Communities: Message List - Converter Standalone
Browsing all 8478 articles
Browse latest View live

Looking for some assistance with P2V using Standalone Converter

I was attempting to create a P2V last night from a VPN'd Windows 8 machine.  All was going well until I got the following error when attempting to set the save to folder on my local machine  Unable to...

View Article


Re: Looking for some assistance with P2V using Standalone Converter

I am not sure about your environment. Are you trying to convert the machine on which VMware Converter is installed? If not - then you *have* to specify a network share where the destination VM should...

View Article


Re: P2V from Debian 5.03 Lenny

The scsi hdd controller is a BusLogic Parallel, set from wmvare converter by default. I don't know if it's good for GOS.The network cards are not yet enabled....In order to check if the virtual disk is...

View Article

Re: P2V from Debian 5.03 Lenny

The scsi hdd controller is a BusLogic Parallel, set from wmvare converter by default. I don't know if it's good for GOS.Check that on the source machine. If it's good, lsmod should list something with...

View Article

Re: Looking for some assistance with P2V using Standalone Converter

No I am trying to convert a remote machine via VPN. If not - then you *have* to specify a network share where the destination VM should be created. This is because the conversion process is actually...

View Article


Converter 5.5.3 unable to detect GPT volume on source machine?

Hi guys, I am attempting to convert a physical Windows Web Server 2008 to a VM running on an ESXi 5.5 host through a VCSA 5.5 vCenter server. As I go through the wizard and land on the final summary...

View Article

Re: Looking for some assistance with P2V using Standalone Converter

Hello,Should the share should be created on the server where the Converter is installed?  I assume this is the case... Can the share be where the converter is installed or does it need to be on another...

View Article

Re: Converter 5.5.3 unable to detect GPT volume on source machine?

Converter recognize only physical devices, if your Z: is mapped drive it is not included in conversion.HTH

View Article


Re: Parallels PCS server to VMware vSphere

For the record, we did a test of a PCS guest VM.  We restored a guest VM from backup to another PCS host.  I used VMware Converter Standalone 5.1 and successfully imported it into one of our vSphere...

View Article


Re: Converter 5.5.3 unable to detect GPT volume on source machine?

This second drive is local to the machine, it is a hardware raid.

View Article

Re: Converter 5.5.3 unable to detect GPT volume on source machine?

Could you upload log bundle? Generally RAID is not supported by Converter.

View Article

Problem Hyper-v 2008 R2 to Vmware ESXI 5.5

Hi Everyonewe are migrating to Vmware ESXI with HP 3PAR Storage we have some important servers as vms on Microsoft Hyperv 2008 R2 , i downloaded and installed the VMware vCenter Converter Standalone...

View Article

Re: Problem Hyper-v 2008 R2 to Vmware ESXI 5.5

Are you try to convert powered on HyperV machine? It's not possible, only powered off HyperV machine could be converted through "Hyper-V Server" menu.Otherwise you can convert powered on VMs through...

View Article


Re: P2V of Oracle Enterprise Linux Release 4 32 Bit

We made some changes and P2V worked. 1. Installed VMware converter on Local Network 2. Started P2V and Selected supported VM Hardware Version to 4 or 7 3. Provided IP address manually and removed the...

View Article

Re: Problem Hyper-v 2008 R2 to Vmware ESXI 5.5

i powered off the machine and started the conversion and it didnt work ,  now i tried to install the converter on a powered on machine directly and it worked but it's not a big deal if you have many...

View Article


Re: Problem Hyper-v 2008 R2 to Vmware ESXI 5.5

You don't need to install the converter on each machine, only the converter agent, which is installed automatically when it's not detected on destination machine.HTH

View Article

Re: Problem Hyper-v 2008 R2 to Vmware ESXI 5.5

ok thanks i'll try the powered on machine since it worked with the first vm

View Article


converter error

Section for VMware vCenter Converter Standalone Client, pid=324, version=5.5.3, build=2183569, option=Release2015-05-10T22:27:34.291+08:00 [01036 info 'Default'] Logging uses fast path:...

View Article

Re: converter error

Try to install Converter Agent on source machine manually.HTH

View Article

Re: Converter 5.5.3 unable to detect GPT volume on source machine?

I have attached the log bundle. Thanks!

View Article
Browsing all 8478 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>