So i have removed all the exclude list.. but still i cant beleive this. The transfer takes around 5 minutes. That is just impossible, the server that i am trying to COMPLETELY COPY has over 100GB of data used (see below)
mail2:/InstanceSync# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 4.7G 248M 4.5G 6% /
tmpfs 1015M 0 1015M 0% /lib/init/rw
udev 10M 100K 10M 1% /dev
tmpfs 1015M 0 1015M 0% /dev/shm
/dev/md0 134M 44M 90M 33% /boot
/dev/md5 209G 97G 112G 47% /home
/dev/md4 1.9G 33M 1.9G 2% /tmp
/dev/md2 9.4G 612M 8.8G 7% /usr
/dev/md3 4.7G 3.2G 1.5G 69% /var
Here is what i input in the script when i run it :
1st : Ip adress : x.x.x.x
2nd : I press enter (leave it blank)
3rd : i tried with either Blank or "/" but ended up with the same non functionnal result.
Is there something i am missing, or is my system too complicated to do the transfer ? I mean if this script normally should copy everythimg why isent it doing so..
Thanks so much again !